SERVICES

FPGA Based Design

AMBER FPGA DEVELOPMENT BOARD

Amber is an easy to use FPGA Development board featuring Xilinx Spartan-6 FPGA. Amber is specially designed for experimenting and learning system design with FPGAs. This development board features Xilinx XC6SLX9 TQG144 FPGA with maximum 70 user IOs, FT232H USB device, R422/485,RS232 serial communication interfaces ,on board SPI flash and DDR2 memory.

 

FEATURES

 

  • FPGA: Spartan-6 XC6SLX9
  • 70 IOs for user defined purposes
  • 128-Mbit DDR SDRAM
  • FT232H single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC
  • 4Mb SPI flash memory
  • 50MHz crystal oscillator
  • Single power rail Input of 5V
  • JTAG programming Header
  • RS422/ RS485/ RS232 Interface
The Xilinx Spartan-6 FPGA introduces significant enhancements in the low-power FPGA arena, with industry leading features such as suspend and hibernate, combined with up to 60% less operating power compared to Spartan-3A
 Amber is an easy to use FPGA Development board featuring Xilinx Spartan-6 FPGA. Amber is specially designed for experimenting and learning system design with FPGAs.
 This development board features Xilinx XC6SLX9 TQG144 FPGA with maximum 70 user IOs, FT232H USB device, R422/485,RS232 serial communication interfaces and on board SPI flash and DDR2 memory.
 Product Prototype Development
 Development and testing of custom embedded processors
 Signal Processing
 Communication devices development
 Educational tool for Schools and Universities
  Amber FPGA Development Board  

FPGA BASED LINE SCAN CAMERA

The linescan sensor module consists of high speed linear image sensor (Monochromatic), ADC, Noise filter and Amplifiers. The Linear Image Sensor consists of an array of high performance, low dark current photo-diode pixels. The sensor features sample and hold capability, selectable resolution and advanced power management. The device can operate at voltages as low as 2.8V making it ideal for portable applications. A key feature over traditional CCD technology is that the device can be read and reread non-destructively, allowing the user to maximize signal to noise and dynamic range. Internal logic automatically reduces power consumption when lower resolution settings are selected. A low power standby mode is also available to reduce system power consumption when the imager is not in use.

FEATURES

  • USB 2.0 interface
  • Sync Output for strobe
  • User configurable exposure time
  • Line scan rate: 29,000 lines/second(Max)
  • USB bus powered / Self powered operation
  • Full Frame Shutter and Dynamic Pixel Reset (DPR) Modes
  • Supports C Mount, CS Mount and M12 lenses
  • User configurable Resolutions of 1024, 512, 256 and 128 pixels
  • DAC :- 12BIT (Optional)
  • RS232 / RS422(20Mbps max) / RS485 (20Mbps max) Interface
  • ADC:- 8 bit, 60 MHz sampling ADC or 12-bit 20MHZ ADC (Optional)
 The linescan sensor module consists of high speed linear image sensor (Monochromatic), ADC, Noise filter and Amplifiers. The Linear Image Sensor consists of an array of high performance, low dark current photo-diode pixels.
 The sensor features sample and hold capability, selectable resolution and advanced power management. The device can operate at voltages as low as 2.8V making it ideal for portable applications. A key feature of this technology over traditional CCD technology is that the device can be read and reread non-destructively, allowing the user to maximize signal to noise and dynamic range.
 Internal logic automatically reduces power consumption when lower resolution settings are selected. A low power standby mode is also available to reduce system power consumption when the imager is not in use.
 INTUSTRIAL LINE SCAN CAMERA